gbj25005 - gbj2510 document number: ds21221 rev. 8 - 2 1 of 4 www.diodes.com october 2009 ? diodes incorporated gbj25005 - gbj2510 25a glass passivated bridge rectifier features ? glass passivated die construction ? high case dielectric strength of 2500v rms ? low reverse leakage current ? surge overload rating to 350a peak ? ideal for printed circuit board applications ? ul listed under recognized component index, file number e94661 ? lead free finish/rohs compliant (note 4) mechanical data ? case: gbj ? case material: molded plastic. ul flammability classification 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: plated leads, solderable per mil-std-202, method 208 ? lead free plating (tin finish). ? polarity: molded on body ? mounting: through hole for #6 screw ? mounting torque: 5.0 in-lbs maximum ? marking: type number ? weight: 6.6 grams (approximate) maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol gbj 25005 gbj 2501 gbj 2502 gbj 2504 gbj 2506 gbj 2508 gbj 2510 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r ( rms ) 35 70 140 280 420 560 700 v average forward rectified output current (note 1) @ t c = 100c i o 25 a non-repetitive peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 350 a thermal characteristics characteristic symbol value unit typical thermal resistance junction to case (note 3) r jc 0.6 c/w operating and storage temperature range t j, t stg -65 to +150 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol value unit forward voltage (per element) @ i f = 12.5a v fm 1.05 v peak reverse current @ t c = 25c at rated dc blocking voltage @ t c = 125c i r 10 500 a i 2 t rating for fusing (t < 8.3ms) (note 1) i 2 t 510 a 2 s typical total capacitance (per element) (note 2) c t 85 pf notes: 1. non-repetitive, for t > 1ms and < 8.3 ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. thermal resistance from junction to case per element. unit mounted on 220 x 220 x 1.6mm aluminum plate heat sink. 4. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied. please visit our website at http://www.diodes.com/pr oducts/lead_free.html.
gbj25005 - gbj2510 document number: ds21221 rev. 8 - 2 2 of 4 www.diodes.com october 2009 ? diodes incorporated gbj25005 - gbj2510 0 5 10 15 20 25 30 25 50 75 100 125 150 i, ave r a g e r e c t i f ied c u r r e n t (a) o t , case temperature (c) fig. 1 forward current derating curve c resistive or inductive load with heatsink without heatsink 0.01 0.1 1.0 10 00 . 8 1.6 i , ins t an t ane o u s f o r wa r d c u r r en t (a) f 2.0 100 t = 25c j 1.2 v , instantaneous forward voltage (v) fig. 2 typical forward characteristics (per element) f 0.4 1 10 100 i, p eak f o r wa r d s u r g e c u r r en t (a) fsm number of cycles at 60 hz fig. 3 maximum non-repetitive surge current t = 25c j single half-sine-wave 0 100 200 300 400 1 100 1,000 1.0 10 100 c , t o t al c a p a c i t an c e (p f ) t v , reverse voltage (v) fig. 4 typical total capacitance, per element r 10 0.1 1.0 10 100 1,000 020406080 100 120 140 percent of rated peak reverse voltage (%) fig. 5 typical reverse characteristics
gbj25005 - gbj2510 document number: ds21221 rev. 8 - 2 3 of 4 www.diodes.com october 2009 ? diodes incorporated gbj25005 - gbj2510 ordering information (note 5) part number case packaging gbj25005-f gbj 15/tube gbj2501-f gbj 15/tube gbj2502-f gbj 15/tube gbj2504-f gbj 15/tube gbj2506-f gbj 15/tube gbj2508-f gbj 15/tube gbj2510-f gbj 15/tube notes: 5. for packaging details, go to our w ebsite at http://www.diodes .com/datasheets/ap02007.pdf. package outline dimensions gbj dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a
gbj25005 - gbj2510 document number: ds21221 rev. 8 - 2 4 of 4 www.diodes.com october 2009 ? diodes incorporated gbj25005 - gbj2510 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2009, diodes incorporated www.diodes.com
|
